When an S5 program update is needed
Machines with Siemens SIMATIC S5 controllers are still in use in manufacturing plants. A product change, additional sensor, replacement drive or recurring fault may require the program to be adapted to the installation's current needs.
Here, an update means a change to the machine control program: operating sequences, parameters, signal handling or diagnostics. Each change must be considered in relation to the actual equipment behaviour and plant documentation.
ETOPA has equipment for SIMATIC S5 service
We have suitable equipment and tools for diagnosing Siemens SIMATIC S5 systems and modifying their programs. We confirm what can be read and changed after identifying the CPU, memory arrangement and installation condition.
We select the STEP 5 environment and connection for the particular CPU. A typical S5 programming connection requires both AS511 communication and the TTY 20 mA electrical interface. A computer without a suitable TTY port needs an S5 converter and the correct cable; a USB-to-RS-232 adapter alone does not provide TTY. Connection requirements are described in the Siemens STEP 5 manual, section 2.2.2.
Before visiting, we ask for a photograph of the controller and its full designation. This lets us prepare the equipment for the machine and establish in advance what information will be needed during the work.
Start with a backup and a program version check
We begin by collecting available projects, drawings and information about earlier changes. We check whether the program can be backed up from the controller for the work and compared with the plant's archive.
STEP 5 comments are not transferred to the PLC, so reading the controller cannot recover them. The original project files, symbols, program printouts and electrical drawings help establish signal functions and compare the archive with the program actually running in the machine.
Before making changes, we also establish the conditions for restoring the previous control version. The scope of PLC programming includes preparing changes and checking machine operation.
The memory type matters
We establish where the executing program is stored and how the CPU obtains it at start-up. S5 systems use different arrangements of RAM and EPROM or EEPROM modules; a single procedure cannot be assumed for the whole family.
Changing the program in CPU RAM does not automatically update the EPROM/EEPROM contents. We check RAM retention and program loading at start-up, then select the programming procedure for the exact CPU and module designation. Differences between CPUs are illustrated in the S5-115U manual, section 4.2.2. Restart tests are agreed with the plant, followed by checks of the program version and machine operation.
How we prepare and check changes
- Establish the required machine behaviour and scope of modifications.
- Check the program, documentation, signals and interaction with other devices.
- Prepare changes and agree the implementation conditions, shutdown window and rollback plan.
- Test modified sequences, alarms, interlocks and interaction with drives and machine operators.
- Safeguard the final program version internally for the work and record the changes made.
We tailor the test plan to the process and the effects of the change. Where a change affects safety functions, we define their assessment and verification separately. We agree the schedule with the maintenance team so there is time to check machine operation before production resumes.
What to prepare before contacting us
- A photograph of the CPU nameplate with its full catalogue number, and a photograph of the installed controller.
- The memory module designation, if available.
- The original STEP 5 project, available program backups, drawings and earlier change records.
- A description of the required change or fault symptoms and the conditions in which they occur.
- Information about equipment connected to the PLC, such as the HMI panel and drives.
- The plant location and a possible shutdown window.
If a machine stoppage is the reason for the request, our automation service also checks signals and devices. Diagnostics establish whether a program change, hardware repair or installation correction is needed.
Modify the S5 or modernise the control system?
For a limited modification, continued use of the existing system may be worth considering. A larger extension, parts availability problems or the need for new functions may support machine and control system modernisation.
At ETOPA, we establish the scope based on installation condition and plant needs. Our SIMATIC S5 service equipment allows us to start by investigating the existing system and preparing further work. Send the CPU designation and a description of the task so we can discuss a program update or modernisation plan.
If you are planning to replace the controller, read our guide to modernising S5 to S7-1500.
Technical documentation
The procedure is selected using the documentation for the exact CPU and memory module. The Siemens STEP 5/ST V7.1 manual covers PLC connections in section 2.2.2, comments in 5.3 and EPROM/EEPROM handling in 18.2. It documents an older environment and does not establish compatibility with every computer and controller configuration.